iPad says Not Charging, charges very slowly or not at all? Check the adapter wattage, the cable, the port and the temperature, then learn the signs of a worn port or battery.
MacBook Air or Pro dead, black screen or stuck at startup? Check the charger, force restart, reset power on Intel models and use recovery mode. Learn which signs mean a hardware fault.
PS5 fan roaring, a 'too hot' warning or sudden shutdowns? Fix the placement, clean the dust you can reach and update the console. Learn when it needs an internal cleaning by a technician.
Microsoldering explained in plain words: what board level repair is, which phone, tablet and console problems need it, and why it can save a device you were told to replace.
Xbox Series X, Series S or Xbox One not turning on, or shutting off right away? Check the outlet and cord, do a full power cycle and rule out overheating. Learn the signs of a power supply fault.
Phone fell in the pool, the sink or the toilet? A step by step plan for the first half hour: what to do, what never to do (including rice), and why salt and sugary drinks are more urgent.
Coffee, water or wine on your MacBook keyboard? Shut it down, unplug it and drain it the right way. What not to do, why sticky drinks are worse, and when to bring it in.
Switch dead, not charging in the dock or not turning on? Try the official charger, a forced restart and a dock check. Learn the signs of a worn USB-C port or a failed charging chip.
Walk in, get a free diagnostic and estimate, then decide.
1
Step 1:
Walk in or book
Come to 6201 Greenback Ln Suite A, Citrus Heights. No appointment needed, or send us a request first.
2
Step 2:
Free diagnostic
We find the fault and give you an estimate before any work starts. The diagnostic and estimate are free.
3
Step 3:
We fix it
You approve the price, then we repair it. Microsoldering jobs are done the same day.
4
Step 4:
Pick it up
Collect your device at the shop, open weekdays until 6 pm, Saturday until 2 pm.
Some faults are not a part you can unplug and swap. A charging chip, an HDMI port or a component damaged by liquid sits on the board itself and has to be soldered under magnification. We do this board level work at our shop in Citrus Heights, near Sacramento, and the diagnostic is free.
Motherboard and micro soldering repair in Citrus Heights
When a port, a chip or a small component on the board fails, swapping a
module does not fix it. The part has to be desoldered and a new one soldered
in under magnification. RepairHub does this motherboard, logic board and
micro soldering work at our shop on Greenback Lane in Citrus Heights, a short
drive from anywhere in Sacramento. The diagnostic is free, and you see the
price before any work starts.
Many microsoldering jobs, like replacing a port, are done the same day.
Bigger motherboard faults, especially after water damage, can take up to two
business days. We tell you which one yours is after the free diagnostic.
Charging chip and charging circuit repair
A phone or console that will not charge with any cable is not always a port or
battery problem. On an iPhone the cause can be the battery or the charging IC.
See iPhone not charging. Inside a
Nintendo Switch a small chip manages USB-C power, and when it fails the
console stops charging even though the port and the battery are fine.
Replacing it is microsoldering work. See
Nintendo Switch not charging
and our guide on
a Switch that will not charge.
HDMI port microsoldering for PS5 and Xbox
A console with a damaged HDMI port often powers on but shows nothing on the
TV. The port is soldered to the motherboard, so we desolder the old port and
solder in a new one. See
PS5 HDMI port repair,
Xbox HDMI port repair and the guide on
a PS5 with no signal.
Logic board repair after liquid damage
Liquid on a MacBook goes straight down to the logic board. To deal with it, a
technician opens the laptop, disconnects the battery and looks at the board
under magnification. Affected areas get cleaned of residue and corrosion.
Sometimes cleaning is enough. Other times a component on the board has failed
and needs microsoldering. See
MacBook liquid damage repair and
what to do after a MacBook liquid spill.
Motherboard repair for laptops, tablets and consoles
More photos are in our gallery. To get a number first,
use the repair cost calculator, or walk in to 6201
Greenback Ln Suite A, Citrus Heights, for a free diagnostic. No appointment
needed. Ask about the warranty for your repair on our
warranty page.
What customers say about our Motherboard and Micro Soldering Repair work
Real reviews left on Google by customers of our Citrus Heights shop.
My iphone microphone was glitching and when I called Repair Hub they were able to fix my phone within 10 minutes and their prices were incredible as well. Best part about this particular transaction is the fact that they fixed microphone speaker without opening phone. 10+
Brought my PS5 in for a new hdmi port. Came home plugged it in and everything worked like it was brand new and you can’t beat these prices. Nice clean place and friendly staff definitely recommend
From our bench: Motherboard and Micro Soldering Repair
Photos of real repairs at our Citrus Heights shop.
Motherboard and Micro Soldering Repair on video
Short clips filmed on our bench in Citrus Heights.
iPhone 16 Pro Back Glass Repair
We specialize in iPhone 16 Pro back glass repair — fast, clean, and professionally done.
Before & After iPad Repair
Watch how we professionally restore damaged iPads — fast, clean, and like new again!
Fixing a Broken Xbox FAST
Fixing a broken Xbox fast with expert tools and pro skills — watch the quick repair in action!
Board repair: questions and answers
Still unsure? Call us or walk in for a free diagnostic.
What is microsoldering?
It is soldering very small parts on a circuit board under magnification: chips, connectors and ports that are attached to the board instead of plugged in. Replacing a PS5 or Xbox HDMI port, or the chip that manages USB-C power in a Nintendo Switch, is microsoldering work.
My phone will not charge with any cable. Is it the board?
It can be. Common causes are a worn battery, a damaged charging port or flex cable, and faults on the board such as the charging IC. The diagnostic is free and tells you which one it is.
How long does a board repair take?
Many microsoldering jobs are done the same day. Complex motherboard repairs and water damage can take up to two business days.
Can I bend the pins of a broken HDMI port back myself?
Please do not. It is easy to short neighboring pins or tear the solder pads, and that makes the repair harder. A port with bent pins or a cracked shell has to be replaced.
Visit our Citrus Heights shop
Walk in with your device, no appointment needed. The diagnostic and estimate are free.