Your Phone Got Wet: What to Do in the First 30 Minutes

What you do right after a phone gets wet matters more than anything a technician does later. Water on its own is not what kills most phones. Electricity running through a wet board is, and so is corrosion that keeps going after the liquid seems to be gone. The first half hour is about stopping both.
If you want a quick answer for your exact situation, our 60 second water damage check asks five questions and tells you how urgent it is. The steps below are the same advice in more detail.
Minute 0 to 2: get it out and turn it off
Take the phone out of the water. Then power it off, even if it seems to work fine. A phone that is on keeps current flowing across the board, and wet current is how short circuits happen.
Keep it off. Do not turn it back on “just to check”. Every test run is another chance for a short.
If the phone is already off, leave it off. If the screen is frozen and you cannot shut it down, hold it with the charging port facing down while you get to the next steps, and do not plug it in to “wake it up”.
Minute 2 to 10: open it up from the outside
These steps let trapped water out without opening the phone.
- Take off the case, the screen protector if it is lifting, and any wallet or grip.
- Remove the SIM tray with a SIM tool or a paperclip and leave it out.
- Wipe the outside with a dry, lint free cloth or paper towel. Get the edges, the buttons, the speaker grills and around the camera.
- Hold the phone with the charging port facing down and tap it gently against your palm a few times to let water run out of the port.
Do not push anything into the charging port or speaker holes. Cotton swabs leave fibers behind and can push water further in.
Minute 10 to 30: what not to do
This is where most of the extra damage happens, usually from someone trying to help.
Do not charge it or plug in any cable
Charging sends power straight into a wet board. It is the single most common thing that turns a wet phone into a dead one. That includes wireless chargers and plugging into a computer to “see if it shows up”. Many iPhones will show a liquid detected warning on the port; do not override it.
Do not put it in rice
Rice does not reliably dry a phone. It only touches the outside, while the water that does damage is inside on the board. Rice dust and starch can also get into the ports. Time spent waiting in a bag of rice is time the board spends corroding.
Do not use heat
No hair dryer, oven, microwave, radiator or sunny dashboard. Heat can warp the screen and the battery, and it can damage adhesives and seals. It also does not reach the water that matters.
Do not keep pressing buttons
Pressing the power button again and again to test the phone powers the board while it is wet. Leave it alone.
Do not shake it hard
A gentle tap with the port facing down is fine. Shaking hard can move water from one area of the board to another.
Why the type of liquid matters
Clean fresh water is the least bad case. Pool water, salt water, soda, juice, coffee and anything with sugar are more urgent. Salt and sugar leave residue that keeps eating at the board after the liquid itself dries. A phone that seems fine after a drop in a pool can start failing days or weeks later because of that residue.
Toilet water and other dirty water should also be treated as urgent, for the same reason.
“Water resistant” does not mean safe
Most recent phones have a water resistance rating. That rating is tested in clean fresh water in a lab, on a new phone. Seals wear with age and drops, and a phone with a cracked screen or back glass has lost much of its protection. Treat a water resistant phone that got soaked the same way you would treat any other wet phone.
After 30 minutes: get it looked at
The point of all the steps above is to keep the phone from getting worse until a technician can open it. Inside, we look for liquid and corrosion on the board and connectors, clean them, and check which parts were affected before anything is powered on.
Signs that the damage is already inside:
- the phone will not turn on, or restarts on its own
- the screen has lines, spots or a foggy look
- sound is muffled or the microphone does not work
- the camera lens is fogged from the inside
- the phone gets warm while it is off
Even if none of these show up, it is worth having a phone checked if it was in salt water, a sugary drink or dirty water.
Water damage repair in Citrus Heights
RepairHub is at 6201 Greenback Ln Suite A in Citrus Heights. Walk-ins are welcome and the diagnostic is free, so the faster you bring a wet phone in, the better. For more on what the repair involves, see our iPhone water damage page. Spilled something on a laptop instead? Read what to do after a MacBook liquid spill.
You can also check the price of a water damage repair for your phone. Our warranty page explains how water damaged devices are covered, as this is different from other repairs.
There is an older guide on the same topic from our team: what to do if your phone falls in water.





